Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 714

Example Related Commands NOTE: You cannot apply dampening on an interface that is monitoring traffic for other interfaces. Dell(conf-if-te-2/2)# dampening 20 800 4500 120 Dell(conf-if-te-2/2)# ● clear dampening - clears the dampening counters on all the interfaces or just the specified interface. ● show interfaces dampening - displays interface dampening information. description Assign a descriptive text string to the interface. C9000 Series Syntax Parameters description desc_text To delete a description, use the no description command. desc_text Enter a text string up to 240 characters long. Defaults none Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Modified for E-Series: Revised from 78 to 240 characters. Usage Information Related Commands Important Points to Remember: ● To use special characters as a part of the description string, you must enclose the whole string in double quotes. ● Spaces between characters are not preserved after entering this command unless you enclose the entire description in quotation marks ("desc_text"). ● Entering a text string after the description command overwrites any previous text string that you previously configured as the description. ● The shutdown and description commands are the only commands that you can configure on an interface that is a member of a port-channel. ● Use the show interfaces description command to display descriptions configured for each interface. show interfaces - displays information about an interface. 714 Interfaces