Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1538

ip radius source-interface Specify an interface's IP address as the source IP address for RADIUS connections. C9000 Series Syntax Parameters ip radius source-interface interface To delete a source interface, use the no ip radius source-interface command. interface Enter the following keywords and slot/port or number information: ● For Loopback interfaces, enter the keyword loopback then a number from zero (0) to 16838. ● For the Null interface, enter the keywords null 0. ● For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128. ● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. ● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. ● For VLAN interface, enter the keyword vlan then a number from 1 to 4094. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.5.1.0 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. port Configures NAS port number to accept CoA or DM requests. Syntax port port-number To remove the NAS port configuration, enter the no port command. Defaults Parameters 3799 port-number Enter the NAS port number to accept CoA and DM requests. The range is from 1 to 65535. 1538 Security