Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1118

Related Commands disable - disables multiple spanning tree. revision The revision number for the multiple spanning tree configuration. C9000 Series Syntax Parameters revision range To return to the default values, use the no revision command. range Enter the revision number for the MST configuration. The range is from 0 to 65535. The default is 0. Defaults 0 Command Modes MULTIPLE SPANNING TREE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.1 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Related Commands For two MSTP switches to be within the same MST region, the switches must share the same revision number. msti - maps the VLAN(s) to an MST instance. name - assigns the region name to the MST region. show config View the current configuration for the mode. Only non-default values are shown. C9000 Series Syntax show config Command Modes MULTIPLE SPANNING TREE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. 1118 Multiple Spanning Tree Protocol (MSTP)