Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 68

Usage Information Example Version 9.11(2.1P1) Description Introduced on all Dell EMC Networking OS platforms This command resets the average power and average power start time to the current time. Average power and average power start time will be calculated from the reset time (i.e current time). This output is only applicable for the C1048P, N20xx and N30xx. DellEMC#clear average-power pe 2 stack-unit 3 Proceed to clear Average power ? Confirm [yes/no]:yes DellEMC# This output is only applicable for the C9000 platform (not the port extenders). DellEMC#clear average-power Proceed to clear Average power ? Confirm [yes/no]:yes DellEMC# clear line Reset a terminal line. C9000 Series Syntax Parameters clear line {line-number | console 0 | vty number} line-number console 0 vty number Enter a number for one of the 12 terminal lines on the system. The range is from 0 to 11. Enter the keywords console 0 to reset the console port. Enter the keyword vty then a number to clear a terminal line. The range is from 0 to 9. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. 68 Control and Monitoring