Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 219

Related Commands assumed that the remark is for the rule with the same sequence number, or the group of rules that follow the remark. DellEMC(config-std-nacl)# remark 10 Deny rest of the traffic DellEMC(config-std-nacl)# remark 5 Permit traffic from XYZ Inc. DellEMC(config-std-nacl)# show config ! ip access-list standard test remark 5 Permit traffic from XYZ Inc. seq 5 permit 1.1.1.0/24 remark 10 Deny rest of the traffic seq 10 deny any DellEMC(config-std-nacl)# The following example shows adding a remark without a sequence number: DELLEMC(config-ext-nacl)#permit ip any any DELLEMC(config-ext-nacl)#remark permit any ip DELLEMC(config-ext-nacl)#show c ! ip access-list extended testac seq 5 permit ip any any remark 5 permit any ip The following example shows that the system displays an error message when the same remark string is used with different remark numbers. DELLEMC(config-ext-nacl)#seq 100 permit ip any any DELLEMC(config-ext-nacl)#remark 10 permit any ip DELLEMC(config-ext-nacl)#remark permit any ip DELLEMC(config-ext-nacl)#% Error : Remark string already exists ● show config - display the current ACL configuration. show config Display the current ACL configuration. C9000 Series Syntax show config Command Modes ● CONFIGURATION-IP ACCESS LIST-STANDARD ● CONFIGURATION-IP ACCESS LIST-EXTENDED ● CONFIGURATION-MAC ACCESS LIST-STANDARD ● CONFIGURATION-MAC ACCESS LIST-EXTENDED Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.11.1 8.3.19.0 8.3.7.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Access Control Lists (ACL) 219