Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1567

● hmac-md5 ● hmac-md5-96 Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version Description 9.10(0.0) Introduced on the S6100-ON, S6000, S6000-ON, S5000, S4810, S4820T, S3048- ON, S4048-ON, MXL, C9010, S3100 series, and Z9100-ON. Usage Information ● You can select one or more MAC algorithms from the list. ● Client-supported MAC list gets preference over the server-supported MAC list in selecting the MAC algorithm for the SSH session. ● When the MAC (-m) option is used with the SSH CLI, it overrides the configured or default MAC list. ● When FIPS is enabled or disabled, the client MACs get default configuration. ip ssh password-authentication Enable password authentication for the SSH server. C9000 Series Syntax Parameters ip ssh password-authentication enable To disable password-authentication, use the no ip ssh password-authentication enable command. enable Enter the keyword enable to enable password-authentication for the SSH server. Defaults Enabled Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820t. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information With password authentication enabled, you can authenticate using the local, RADIUS, or TACACS+ password fallback order as configured. Security 1567