Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 467

Command History Version 9.9(0.0) 9.2(1.0) 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced neighbor distribute-list Distribute BGP information via an established prefix list. C9000 Series Syntax Parameters neighbor {ipv6-address | peer-group-name} distribute-list prefix-list-name {in | out} To delete a neighbor distribution list, use the no neighbor {ipv6-address | peer-groupname} distribute-list prefix-list-name {in | out} command. ipv6-address Enter the IPv6 address in the x:x:x:x::x format. NOTE: The :: notation specifies successive hexadecimal fields of zeros. peer-group-name Enter the name of the peer group. prefix-list-name Enter the name of an established prefix list. If you do not configure the prefix list, the default is permit (to allow all routes). in Enter the keyword in to distribute only inbound traffic. out Enter the keyword out to distribute only outbound traffic. Defaults Not configured. Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version 9.9(0.0) Description Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. 8.2.1.0 Introduced on the E-Series ExaScale. 7.4.1.0 Introduced Usage Information Related Commands Other BGP filtering commands include the neighbor filter-list and neighbor route-map commands. ● neighbor filter-list - assigns a AS-PATH list to a neighbor or peer group. ● neighbor route-map - assigns a route map to a neighbor or peer group. neighbor ebgp-multihop Attempt and accept BGP connections to external peers on networks that are not directly connected. C9000 Series Syntax neighbor {ipv6-address | peer-group-name} ebgp-multihop [ttl] Border Gateway Protocol 467