Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1787

static Enter the keyword static to leak or share static routes corresponding to the VRF. Command Modes ROUTE MAP MODE Command History Version 9.9(0.0) Description Introduced on the C9010. 9.8(0.0) Introduced on the S3048-ON and S4048-ON. 9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000-ON, and Z9500. Usage Information Related Commands You can specify the matching criteria only after defining a route-map. Before using this command, you must enter the route map mode using the route-map route-map-name command. The match criteria that you specify is associated with the route-map that you define. The export-target and import-target support only the match protocol and match prefix-list options. Other options that are configured in the route-maps are ignored. ipv6 route-import - imports IPv6 routes from another VRF. redistribute Redistribute leaked or exported routes corresponding to specific protocols. C9000 Series Syntax Parameters redistribute {imported-bgp | import-ospf | import-isis} imported-bgp imported-ospf imported-isis route-map Enter the keyword imported-bgp to redistribute leaked routes that are learnt using the BGP protocol. Enter the keyword imported-ospf to redistribute leaked routes that are learnt using the OSPF protocol. Enter the keyword imported-isis to redistribute leaked routes that are learnt using the ISIS protocol. Enter the name of the route-map to specify the filtering criteria for imported routes. Command Modes CONFIGURATION Command History Version 9.9(0.0) 9.8(0.0) 9.7(0.0) Description Introduced on the C9010. Introduced on the S3048-ON and S4048-ON. Introduced on the S4810, S4820T, S5000, S6000, S6000-ON, and Z9500. Related Commands ip route-import - imports routes from another VRF. Virtual Routing and Forwarding (VRF) 1787