Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1763

vrrp-id all bfd database interface ipv6 packets state timer ● For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID range is from 1 to 4094. (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID. Enter the keyword all to enable debugging of all VRRP groups. Enter the keyword bfd to enable debugging of VRRP BFD interactions. Enter the keyword database to enable debugging of configuration changes. Enter the keyword interface to enable debugging of interface state changes.. Enter the keyword ipv6 to enable debugging for IPv6. Enter the keyword packets to enable debugging of VRRP control packets. Enter the keyword state to enable debugging of VRRP state changes. Enter the keyword timer to enable debugging of the VRRP timer. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.8(0.0) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.5.1.0 6.2.1.1 Introduced on the C9010. Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced on the E-Series. Usage Information If no options are specified, debug is active on all interfaces and all VRRP groups. description Configure a short text string describing the VRRP group. C9000 Series Syntax Parameters description text To delete a VRRP group description, use the no description command. text Enter a text string up to 80 characters long. Defaults Not enabled. Command Modes VRRP Virtual Router Redundancy Protocol (VRRP) 1763