Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 696

Example Related Commands R3# show gvrp brief GVRP Feature is currently enabled. Port GVRP Status Edge-Port Te 1/0 Disabled No Te 1/1 Disabled No Te 1/2 Enabled No Te 1/3 Disabled No Te 1/4 Disabled No Te 1/5 Disabled No Te 1/6 Disabled No Te 1/7 Disabled No Te 1/8 Disabled No R3# show gvrp brief show gvrp statistics - displays the GVRP statistics. show gvrp statistics Display the GVRP configuration statistics. C9000 Series Syntax Parameters show gvrp statistics {interface interface | summary} interface interface summary (OPTIONAL) Enter the keyword interface then one of the interface keywords and slot/ port or number information: ● For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128. ● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. ● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. Enter the keyword summary to display just a summary of the GVRP statistics. Defaults none Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.11.1 7.6.1.0 Inroduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on C-Series, E-Series, and S-Series Usage Information Invalid messages/attributes skipped can occur in the following cases: ● The incoming GVRP PDU has an incorrect length. ● "End of PDU" was reached before the complete attribute could be parsed. 696 GARP VLAN Registration (GVRP)