Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 227

Command Modes CONFIGURATION mode Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.13(0.0) Introduced on the S6100-ON and Z9100-ON. Usage Information Example After enabling the acloptimized feature, reboot the system. DellEMC(conf)#feature acloptimized Configuration change will be in effect after save and reload. ACL config containing TTL, layer3 and VRF conflicts with ACL Cam optimzation feature and these keywords would be discarded while applying the ACL. ip access-list standard Create a standard IP access list (IP ACL) to filter based on IP address. C9000 Series Syntax Parameters ip access-list standard access-list-name To delete an access list, use the no ip access-list standard access-list-name command. access-list-name Enter a string up to 140 characters long as the ACL name. Defaults All IP access lists contain an implicit "deny any"; that is, if no match occurs, the packet is dropped. ACL permit/deny rules are applied when a packet matches the condition in an entry. Command Modes CONFIGURATION CONFIGURATION TERMINAL BATCH Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.10(0.0) 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.10.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 7.4.1.0 6.5.1.0 Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Increased the name string to accept up to 140 characters. Prior to version 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Added support for the non-contiguous mask and added the monitor option. Expanded to include the optional QoS order priority for the ACL entry. Access Control Lists (ACL) 227