Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1612

Command History Example Related Commands This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Dell#show snmp 32685 SNMP packets input 0 Bad SNMP version errors 0 Unknown community name 0 Illegal operation for community name supplied 0 Encoding errors 96988 Number of requested variables 0 Number of altered variables 31681 Get-request PDUs 968 Get-next PDUs 0 Set-request PDUs 61727 SNMP packets output 0 Too big errors (Maximum packet size 1500) 9 No such name errors 0 Bad values errors 0 General errors 32649 Response PDUs 29078 Trap PDUs Dell# snmp-server community - enables the SNMP and set community string. show snmp engineID Display the identification of the local SNMP engine and all remote engines that are configured on the router. C9000 Series Syntax show snmp engineID Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. 1612 Simple Network Management Protocol (SNMP) and Syslog