Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1354

Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.13(0.0) Introduced on the C9010. show config Display the PE provision configuration details. C9000 Series Syntax show config Command Modes PE CONFIG (conf-pe-pe-id) Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) Introduced on the C9010. Example Dell(conf-pe-5)# show config ! pe provision 5 stack-unit 4 type C1048P Dell(conf)#pe 255 Dell(conf-pe-255)#show config ! pe provision 255 cascade interface TenGigabitEthernet 6/0 stack-unit 1 type C1048P show ecid Display the E-Channel identifier (ECID) information for all or any specified interfaces. C9000 Series Syntax Parameters show ecid {interface [interface] | pe pe-id stack-unit unit-number} interface interface Enter the interface keyword, and specify one of the following interface types: ● For a PE Gigabit Ethernet interface, enter the keyword peGigE. You must specify a pe-id/stack-unit/port-id for the interface. ● For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE then the pe-id / stack-unit / port-id information. The pe-id range 1354 Port Extenders (PE)