Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 167

Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.7(0.1) 9.7(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 E-Series Introduced on the C9010 and C1048P. Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Added the nfsmount: parameters to support remote NFS file system. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information Example You can also use the cd {flash: directory name/path | usbflash directory name/ path} command from a port extender (PE) console to change the working directory. Dell#cd flash://TRACE_LOG_DIR copy Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip field). C9000 Series Syntax Parameters copy compressed-config source-filename destination-filename From a PE console, use copy flash: [source-filename destination-filename] | usbflash: [source-filename destination-filename] Enter the following location keywords and information: compressedconfig file-name Enter the keyword compressed-config to copy one file, after optimizing and reducing the size of the configuration file, to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip field). To copy a file enter flash:// and then the filename from the internal FLASH To copy a file on enter ftp://user:password@hostip/filepath an FTP server To copy a file on enter http: http://hostip/filepath an HTTP server File Management 167