Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 73

Usage Information Related Commands Version 9.9(0.0) 9.5(0.1) 9.5(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the C9010 and C1048P. Added support for roles on the Z9500. Added support for roles on the Z9000, S6000, S4820T, S4810, MXL Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. Users entering EXEC Privilege mode or any other configured privilege level can access configuration commands. To protect against unauthorized access, use the enable password command to configure a password for the enable command at a specific privilege level. If no privilege level is specified, the default is privilege level 15. You can also use the enable [level] command from a PE console to enter the privileged mode. NOTE: If you are authorized for the EXEC Privilege mode by your role, you do not need to enter an enable password. enable password - configures a password for the enable command and to access a privilege level. enable cpu-clock-monitor Enables Intel CPU LPC (Low Pin Count) clock-failure monitoring. Syntax enable cpu-clock-monitor To disable this feature, use the no enable cpu-clock-monitor command. Parameters None Defaults Enabled Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version Description 9.11(2.0P2) Introduced on the C9010, S3048-ON, S6100-ON and Z9100-ON. Usage Information Enables Intel CPU LPC (Low Pin Count) clock-failure monitoring and issues a warning syslog to the user to take appropriate action if signal degradation is seen. Control and Monitoring 73