Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 534

Example Dell# show dcb stack-unit 1 port-set 0 DCB Status : Enabled PFC Port Count : 56 (current), 56 (configured) PFC Queue Count : 2 (current), 2 (configured) show hardware pfc-nodrop-priority View the packets drop count corresponding to the priority. Syntax Parameters show hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-unit-number port-set port-pipe stack-unit stack- Enter the keywords stack-unit and the stack unit number. The range is from 0 unit-number to 5. port-set portpipe Enter the keywords port-set and port-pipe number. The port-pipe number is 0. Command Modes EXEC EXEC Privilege Command History Version 9.10(0.0) Description Introduced on the C9010, S6000, S6000-ON, Z9100-ON and S6100-ON. Example Dell#show hardware pfc-nodrop-priority l2-dlf drops stack-unit 0 port-set 0 Priority DropCount 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 Related Commands pfc-nodrop-priority l2-dlf drop - configures to drop the unknown unicast packets flooding on lossless priorities. show interface pfc Display the PFC configuration applied to ingress traffic on an interface, including priorities and link delay. C9000 Series Syntax Parameters show interface port-type slot/port pfc {summary | detail} port-type slot/ port pfc {summary | detail} Enter the port-type slot and port PFC information. Enter the keyword summary for a summary list of results or enter the keyword detail for a full list of results. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. 534 Data Center Bridging (DCB)