Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1067

no disable Dell# snmp-notification-interval Used to configure the value for the lldp notification interval, to throttle lldp notification messages. Syntax [no] snmp-notification-interval [seconds] To disable this feature, use the no snmp-notification-interval command. Parameters seconds Enter a value from 5 to 3600 seconds. Defaults 5 seconds Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.11(2.5) Introduced on the S3048-ON, S4048-ON, S4048T-ON, S6010-ON and Z9100-ON Usage Information SNMP notification for the changes in the lldp remote entry table is throttled by 5 seconds (default), or the configured time set using this command. If more than one notification message is generated within the configured time, only the first one will be sent and the remaining messages are suppressed. LLDP-MED Commands The following are the LLDP-MED (Media Endpoint Discovery) commands. The Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement commands. The CSeries and S-Series support all commands. The E-Series generally supports the commands. However, LLDP-MED commands are more useful on the C-Series and the S50V model of the S-Series, because they support Power over Ethernet (PoE) devices. As defined by ANSI/TIA-1057, LLDP-MED provides organizationally specific TLVs (Type Length Value), so that endpoint devices and network connectivity devices can advertise their characteristics and configuration information. The Organizational Unique Identifier (OUI) for the Telecommunications Industry Association (TIA) is 00-12-BB. ● LLDP-MED Endpoint Device - any device that is on an IEEE 802 LAN network edge, can communicate using IP, and uses the LLDP-MED framework. ● LLDP-MED Network Connectivity Device - any device that provides access to an IEEE 802 LAN to an LLDP-MED endpoint device, and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell Networking system is an LLDP-MED network connectivity device. Regarding connected endpoint devices, LLDP-MED provides network connectivity devices with the ability to: ● manage inventory ● manage Power over Ethernet (POE) ● identify physical location ● identify network policy Link Layer Discovery Protocol (LLDP) 1067