Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1428

policy-map-input Create an input policy map. C9000 Series Syntax Parameters policy-map-input policy-map-name [layer2] [cpu-qos] To remove an input policy map, use the no policy-map-input policy-map-name [layer2] [cpu-qos] command. policy-map-name Enter the name of the policy map in character format (32 characters maximum). layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The default is Layer 3. cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input policy to be used to rate-limit control-plane traffic (CoPP). Defaults Layer 3 Command Modes CONFIGURATION CONFIGURATION TERMINAL BATCH Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.10(0.0) 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 7.4.1.0 6.1.1.1 Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Policy name character limit increased from 16 to 32. Introduced on the S-Series. Introduced on the C-Series. Expanded to add support for Layer 2. Introduced on the E-Series. Usage Information Related Commands The input policy map is used to classify incoming traffic to different flows using class-map, QoS policy, or incoming packets DSCP. This command enables Policy-Map-Input Configuration mode (conf-policy-mapin). When you configure an input policy map for CoPP, you must enter the keyword cpu-qos. Use this command in Configuration Terminal Batch mode to create an input policy map in a dual-homing setup. service-queue - assigns a class map and QoS policy to different queues. policy-aggregate - allows an aggregate method of configuring per-port QoS using policy maps. service-policy input - applies an input policy map to the selected interface. 1428 Quality of Service (QoS)