Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 409

best Path source: I - internal, a - aggregate, c - confed-external, r redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network From Reuse Path h 77.0.0.0/24 172.16.0.2 00:00:00 d 55.0.0.0/24 172.16.0.2 00:30:44 200 i *> 66.0.0.0/24 172.16.0.2 00:00:00 200 i Dell#*>n 66.66.77.77/32 0.0.0.0 Flaps 1 3 1 0 Duration 00:00:03 00:00:25 00:00:23 32768 i show ip bgp inconsistent-as View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are announced from the same neighbor AS but with a different AS-Path. C9000 Series Syntax show ip bgp [ipv4 unicast] inconsistent-as Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information The following describes the show ip bgp inconsistent-as command shown in the following example. Field Description Network Next Hop Metric LocPrf Weight Path Displays the destination network prefix of each BGP route. Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table. Displays the BGP route's metric, if assigned. Displays the BGP LOCAL_PREF attribute for the route. Displays the route's weight. Lists all the ASs the route passed through to reach the destination network. Border Gateway Protocol 409