Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 207

Version 7.6.1.0 7.4.1.0 Description Introduced on the C-Series and S-Series. Introduced on the E-Series. dot1x reauthentication Enable periodic reauthentication of the client. C9000 Series Syntax Parameters dot1x reauthentication [interval seconds] To disable periodic reauthentication, use the no dot1x reauthentication command. interval seconds (Optional) Enter the keyword interval then the interval time, in seconds, after which reauthentication is initiated. The range is from 1 to 31536000 (one year). The default is 3600 (1 hour). Defaults 3600 seconds (1 hour) Command Modes INTERFACE INTERFACE (BATCH MODE) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.10(0.0) 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 7.6.1.0 7.4.1.0 Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the C-Series and S-Series. Introduced on the E-Series. dot1x reauth-max Configure the maximum number of times a port can reauthenticate before the port becomes unauthorized. C9000 Series Syntax dot1x reauth-max number To return to the default, use the no dot1x reauth-max command. 802.1X 207