Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1533

RADIUS Commands The following RADIUS commands are supported by Dell Networking OS. aaa radius auth-method Configure the authentication method to use with RADIUS for user access. Syntax aaa radius auth-method {pap | mschapv2} To undo the RADIUS authentication method configuration, use the no aaa radius auth-method command. Parameters pap mschapv2 Enter the keyword pap to use the Password Authentication Protocol (PAP) for RADIUS authentication. This protocol uses the username and password attributes in the access-request message sent to the RADIUS server. Enter the keyword mschapv2 to use the Microsoft Challenge-Handshake Authentication Protocol (MS-CHAPv2) for RADIUS authentication. This protocol is considered to be more secure than PAP and uses mutual authentication based on a random challenge and challenge response. Defaults PAP Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version Description 9.11(2.0P2) Introduced the command on all Dell Networking OS platforms. Usage Information If an authentication method is not configured using this command, then PAP is used for authentication with the RADIUS server. You can configure the RADIUS authentication method to access the switch using the following applications: Console, Telnet, SSH, REST, and OMI. client Configures trusted DAC clients. Syntax client {ipv4-addr | ipv6-addr | hostname} [vrf vrf-name] [key [encryptiontype] key] To undo the DAC client configuration, enter the no client host command. Defaults Parameters If VRF is not configured, default VRF is considered. ipv4-addr ipv6-addr hostname vrf vrf-name key encryption-type Enter the keyword ipv4-addr to specify the IPv4 address of the DAC. Enter the keyword ipv6-addr to specify the IPv6 address of the DAC. Enter the keyword hostname to enter the name of the host. Enter the keyword vrf followed by the name of the VRF to associate a VRF with the client. (Optional) Enter the keyword key to specify an encryption key. (Optional) Enter either 0 or 7 as the encryption type for the specified key. The options are: Security 1533