Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1520

Related Commands Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. line - applies an authentication method list to the designated terminal lines. ip access-list standard - names (or selects) a standard access list to filter based on the IP address. ip access-list extended - names (or selects) an extended access list based on the IP addresses or protocols. enable password Change the password for the enable command. C9000 Series Syntax Parameters enable password [level level] [encryption-type] password To delete a password, use the no enable password [encryption-type] password [level level] command. level level encryption-type password (OPTIONAL) Enter the keyword level then a number as the level of access. The range is from 1 to 15. (OPTIONAL) Enter the number 7 or 0 as the encryption type. Enter a 7 then a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Networking router. Use this parameter only with a password that you copied from the show running-config file of another Dell Networking router. Enter a text string, up to 32 characters long, as the clear text password. Defaults No password is configured. level = 15. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Neworking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. 1520 Security