Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1749

show vlt private-vlan Display the private VLAN (PVLAN) associated with the VLT LAG for VLT peer nodes. C9000 Series Syntax show vlt private-vlan Command Modes EXEC Command History Version 9.9(0.0) Description Introduced on the C9010. 9.5(0.1) Introduced on the Z9500. 9.4(0.0) Introduced on the S6000. 9.3(0.0) Introduced on the Z9000, S4810, and S4820T. Usage Information Example If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a part of the primary VLAN and its associated secondary VLANs, similar to the behavior for normal trunk ports. VLAN symmetry is not validated if you associate an ICL to a PVLAN. Similarly, if you dissociate an ICL from a PVLAN, although the PVLAN symmetry exists, ICL is removed from that PVLAN in such a case. The ICL Status field denotes the type of the VLAN port of the VLTi link configured in a PVLAN. Dell#show vlt private-vlan vlan-id Codes: C- Community, I - Isolated, V - Internally tagged, T - tagged, * - VLT Pvlan Primary Secondary ICL Status 10 V (*) 20(C) V 30 (I) V 40 T 50(C) T 60 (I) T show vlt role Displays the VLT peer status, role of the local VLT switch, VLT system MAC address and system priority, and the MAC address and priority of the local VLT device. C9000 Series Syntax show vlt role Default Not configured. Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.5(0.1) Introduced on the C9010. Introduced on the Z9500. Virtual Link Trunking (VLT) 1749