Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 682

disable Disable the resilient ring protocol. C9000 Series Syntax disable To enable the Resilient Ring Protocol, use the no disable command. Defaults Disabled Command Modes CONFIGURATION (conf-frrp) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.11.1 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced. interface Configure the primary, secondary, and control-vlan interfaces. C9000 Series Syntax Parameters interface {primary interface secondary interface control-vlan vlan-id} To return to the default, use the no interface {primary interface secondary interface control-vlan vlan-id} command. primary interface Enter the keyword primary to configure the primary interface then one of the following interfaces and slot/port information: ● Fast Ethernet interface: enter the keyword FastEthernet then the slot/port information. ● Port Channel interface: enter the keyword port-channel then a number. The range is from 1 to 128. ● 10-Gigabit Ethernet interface: enter the keyword TenGigabitEthernet then the slot/port information ● 40-Gigabit Ethernet interface: enter the keyword fortyGigE then the slot/port information secondary interface Enter the keyword secondary to configure the secondary interface then one of the following interfaces and slot/port information: 682 Force10 OS Resilient Ring Protocol (FRRP)