Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1353

pe-id1,peid2,........... no-confirm Enter a list of port extender IDs that you want to schedule for rebooting with each pe-id delimited by a coma. Enter the keyword no-confirm to suppress the warning messages that are displayed during rebooting of the PE. Command Modes ● EXEC Privilege Usage Information ● The reset pe range command is applicable for the entire PE stack-unit. This command is not used for per stack-unit scenario. Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.13(0.0) 9.9(0.0) Added the range keyword to the command. Introduced on the C9010. Example The following command resets all the PEs within range 1 to 5: reset pe range 1-5 no-confirm. The following command resets all the PEs within range 5 to 10 and also the pe-ids 1 and 3: reset pe range 1,3,5-10 no-confirm. reset pe schedule show Display a list of PEs that are scheduled to be rebooted. Syntax reset pe schedule show Defaults None. Command Modes ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.13(0.0) Introduced on the C9010. Example JobID 000 001 002 Status Scheduled Scheduled Scheduled Scheduled Start Time 08:59-09/19/17 23:30-09/19/17 20:30-12/29/17 Scheduled PE's 0,1 2,3 5-6 reset pe unschedule Use this command to undo the scheduled PR reboot configuration. Syntax Defaults Parameters reset pe unschedule job-id None. job-id Enter the job ID of the scheduled PE reboot configuration that you want to undo. Command Modes ● EXEC Privilege Port Extenders (PE) 1353