Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1017

Command History Usage Information Related Commands This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.12.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically learned MAC addresses are converted to sticky for that port. Any new MAC address that is learned also becomes sticky for that port. show mac learning-limit - displays the details of the mac learning-limit. mac learning-limit station-move-violation Specify the actions for a station move violation. C9000 Series Syntax Parameters mac learning-limit station-move-violation {log | shutdown-both | shutdownoffending | shutdown-original} To disable a configuration, use the no mac learning-limit station-move-violation command, then the configured keyword. log shutdown-both shutdownoffending shutdownoriginal Enter the keyword log to generate a syslog message on a station move violation. Enter the keyword shutdown to shut down both the original and offending interface and generate a syslog message. Enter the keywords shutdown-offending to shut down the offending interface and generate a syslog message. Enter the keywords shutdown-original to shut down the original interface and generate a syslog message. Defaults none Command Modes INTERFACE (conf-if-interface-slot/port) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Layer 2 1017