Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1709

password ● 7 (seven) indicates that a password is encrypted using a DES hashing algorithm. It specifies a hidden authentication data. ● WORD is the un-encrypted (cleartext) authentication data. Enter a string up to 32 characters as the password. Defaults NTPQ Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.14(0.0) Introduced on the C9010, FN-IOM, MIOA, MXL, S3048-ON, S4048-ON, S4048T- ON, S5048F-ON, S6000, S6000-ON, S6010-ON, S6100-ON, and Z9100-ON. Usage Information NTP control key is not configured by default. If the encryption-type (0 or 7) is not specified, then 0 is selected by default. ntp broadcast client Set up the interface to receive NTP broadcasts from an NTP server. C9000 Series Syntax ntp broadcast client To disable broadcast, use the no ntp broadcast client command. Defaults Disabled. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. System Time and Date 1709