Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 314

multiplier value role [active | passive] Enter the keywords multiplier to specify the number of packets that must be missed in order to declare a session down. The range is from 3 to 50. The default is 3. Enter the role that the local system assumes: ● Active - The active system initiates the BFD session. Both systems can be active for the same session. ● Passive - The passive system does not initiate a session. It only responds to a request for session initialization from the active system. The default is Active. Defaults Refer to Parameters. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.0.0.0 8.3.19.0 8.3.10.0 8.2.1.0 7.6.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the C-Series. Introduced on the E-Series. Example Dell(conf-if-te-0/3)# bfd interval 250 min_rx 300 multiplier 4 role passive Dell(conf-if-te-0/3)# bfd protocol-liveness Enable the BFD protocol liveness feature. C9000 Series Syntax bfd protocol-liveness Defaults Disabled Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) Introduced on the C9010. Introduced on the Z9500. 314 Bidirectional Forwarding Detection (BFD)