Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 948

Usage Information Example Related Commands The following describes the show ip route summary shown in the following example. Column Heading Description Route Source Identifies how the route is configured in the system. Active Routes Non-active Routes Identifies the best route if a route is learned from two protocol sources. Identifies the back-up routes when a route is learned by two different protocols. If the best route or active route goes down, the non-active route becomes the best route. ospf 100 If routing protocols (OSPF, RIP) are configured and routes are advertised, then information on those routes is displayed. Total 1388 active... Displays the number of active and non-active routes and the memory usage of those routes. If there are no routes configured in the system, this line does not appear. Dell>show ip route summary Route Source Active Routes Non-active Routes connected 17 0 static 3 0 ospf 100 1368 2 Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5 Total 1388 2 Total 1388 active route(s) using 222440 bytes Total 2 non-active route(s) using 128 bytes Dell> show ip route - displays information about the routes found in the switch. show ip traffic View IP traffic statistics related to switch CPUs, including ICMP, UDP, TCP and ARP counters. C9000 Series Syntax Parameters show ip traffic {all | cp | rp} all (OPTIONAL) Enter the keyword all to view IP traffic statistics from all processors. cp (OPTIONAL) Enter the keyword cp to view only IP traffic statistics from the Control Processor. rp (OPTIONAL) Enter the keyword rp to view only IP traffic statistics from the Route Processor. Default View IP traffic statistics from all processors. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) Introduced on the C9010. 948 IPv4 Routing