Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1194

show ip ospf database Display all LSA information. If you do not enable OSPF on the switch, no output is generated. C9000 Series Syntax Parameters show ip ospf process-id [vrf vrf-name] database [database-summary] process-id vrf vrf-name databasesummary Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Enter the keyword vrf and then the name of the VRF to view LSA information on OSPF processes corresponding to that VRF. (OPTIONAL) Enter the keywords database-summary to the display the number of LSA types in each area and the total number of LSAs. Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.4(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Introduced on the C9010. Added support for VRF on all platforms (Except MXL and STOMP). Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support of Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the show ip ospf process-id database command shown in the following example. Field Description Link ID ADV Router Age Seq# Checksum Link count Identifies the router ID. Identifies the advertising router's ID. Displays the link state age. Identifies the link state sequence number. This number allows you to identify old or duplicate link state advertisements. Displays the Fletcher checksum of an LSA's complete contents. Displays the number of interfaces for that router. Example Dell>show ip ospf 1 database OSPF Router with ID (11.1.2.1) (Process ID 1) Router (Area 0.0.0.0) 1194 Open Shortest Path First (OSPFv2 and OSPFv3)