Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1717

Version 6.1.1.0 Description Introduced on the E-Series. Usage Information The following describes the show ntp associations command shown in the Example below. Field Description (none) One or more of the following symbols could be displayed: ● * means synchronized to this peer. ● # means almost synchronized to this peer. ● + means the peer was selected for possible synchronization. ● - means the peer is a candidate for selection. ● x means designated falsesticker by the intersection algorithm. remote ref clock st when poll reach delay offset offset disp LOCAL(0) .LOCL. Displays the remote IP address of the NTP peer. Displays the IP address of the remote peer's reference clock. Displays the peer's stratum, that is, the number of hops away from the external time source. A in this column means the NTP peer cannot reach the time source. Displays the last time the switch received an NTP packet. Displays the polling interval (in seconds). Displays the reachability to the peer (in octal bitstream). Displays the time interval or delay for a packet to complete a round-trip to the NTP time sourc (in milliseconds). Displays the relative time of the NTP peer's clock to the switch clock (in milliseconds). Displays the relative time of the NTP peer's clock to the switch clock (in milliseconds). Displays the dispersion. Indicates that the local machine has synced with itself. Generally, only a NTP master syncs wit itself. Synchronization of the local machine takes place to this peer. Indicates the reference clock of the NTP master. Example (without ntp master configuration) DellEMC# show ntp associations remote vrf-Id ref clock st when poll reach delay offset disp *10.16.151.117 0 45.127.112.2 3 8 16 17 1.383 362.704 0.008 * master (synced), # backup, + selected, - outlier, x falseticker Example (with ntp master configuration) Related Commands Dell EMC#show ntp associations remote vrf-Id ref clock st when poll reach delay offset di *LOCAL(0) 0 .LOCL. 7 6 16 377 0.000 0.000 0.002 10.16.127.86 0 10.16.127.26 5 9 16 1 65.292 13829.9 0.002 10.16.127.144 0 10.16.127.26 5 6 16 1 0.829 13795.2 0.002 10.16.127.44 0 10.16.127.26 5 - 16 1 0.799 13791.5 0.002 * master (synced), # backup, + selected, - outlier, x falseticker Dell EMC# In the above example, ● LOCAL(0) indicates that the local machine synchronizes with itself. ● .LOCL. indicates reference clock of the NTP master. ● show ntp status - displays the current NTP status. System Time and Date 1717