Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 101

Related Commands -- Fan Status -- Unit Bay TrayStatus Fan0 Speed Fan1 Speed Fan2 Speed Fan3 Speed 0 0 up up 3498 up 3501 up 3464 up 3510 0 1 up up 3510 up 3407 up 3501 up 3431 0 2 up up 3545 up 3504 up 3440 up 3440 Speed in RPM ● show linecard - view the line card status. ● show rpm - view the RPM status. show command-history Display a buffered log of all commands all users enter along with a time stamp. Syntax show command-history Defaults none Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.8(0.0P5) 9.8(0.0P2) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series and E-Series. Usage Information Example One trace log message is generated for each command. No password information is saved to this file. A command-history trace log is saved to a file after failover. Dell EMC Networking TAC analyzes this file to help identify the root cause of it. The timestamps display format of the show command-history output changes based on the service timestamps log datetime configuration. The time format can be in uptime, local time or UTC time. If timestamp is disabled (no service timestamps log), the command history time format is shown with timestamp defaults (service timestamps log datetime localtime) as in Example 4. Example 1: Default configuration service timestamps log datetime or service timestamps log datetime localtime DellEMC#show clock 15:42:42.804 IST Fri May 17 2019 DellEMC(conf)#service timestamps log datetime Control and Monitoring 101