Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 423

Example Field Description If the neighbor is disabled, the phrase (Admin shut) appears in this column. Dell#show ip bgp summary BGP router identifier 192.168.11.5, local AS number 100 BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 2 network entrie(s) using 152 bytes of memory 2 paths using 208 bytes of memory BGP-RIB over all using 210 bytes of memory 2 BGP path attribute entrie(s) using 144 bytes of memory 1 BGP AS-PATH entrie(s) using 10 bytes of memory 2 neighbor(s) using 16384 bytes of memory Neighbor AS Down State/Pfx 172.16.0.2 200 00:05:34 2 192.168.10.2 100 00:00:00 (shut) Dell# MsgRcvd MsgSent 10 8 0 22 TblVer InQ OutQ Up/ 0 0 0 0 0 0 show running-config bgp To display the current BGP configuration, use this feature. C9000 Series Syntax show running-config bgp Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 7.6.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Border Gateway Protocol 423