Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 947

Example Related Commands Version 6.1.1.0 Description Introduced on the E-Series. Dell#show ip route list test Codes:C- connected, S - static, R - RIP, B- BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated, O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2- OSPF NSSA external type 2, E1 - OSPF external type 1, E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default, >- non-active route, + - summary route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change R 2.1.0.0/24 via 2.1.4.1, Te 2/43 120/2 3d0h R 2.1.1.0/24 via 2.1.4.1, Te 2/43 120/2 3d1h R 2.1.2.0/24 via 2.1.4.1, Te 2/43 120/1 3d0h R 2.1.3.0/24 via 2.1.4.1, Te 2/43 120/1 3d1h C 2.1.4.0/24 Direct, Te 2/43 0/0 3d1h ip prefix-list - enters CONFIGURATION-IP PREFIX-LIST mode and configures a prefix list. show ip prefix-list summary - displays a summary of the configured prefix lists. show ip route summary View a table summarizing the IP routes in the switch. C9000 Series Syntax show ip route summary Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. IPv4 Routing 947