Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1246

connected static metric metricvalue metric-type type-value route-map mapname tag tag-value Enter the keyword connected to redistribute routes from physically connected interfaces. Enter the keyword static to redistribute manually configured routes. Enter the keyword metric then the metric value. The range is from 0 to 16777214. The default is 20. (OPTIONAL) Enter the keywords metric-type then the OSPFv3 link state type of 1 or 2 for default routes. The values are: ● 1 for a type 1 external route ● 2 for a type 2 external route The default is 2. (OPTIONAL) Enter the keywords route-map then the name of an established route map. If the route map is not configured, the default is deny (to drop all routes). (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPFv3. The range is from 0 to 4294967295 The default is 0. Defaults Not configured. Command Modes ROUTER OSPF for OSPFv2 ROUTER OSPFv3 for OSPFv3 Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.1.(0.0) 8.3.19.0 7.8.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced support for OSPFv3 on the S4810 and Z9000. Introduced on the S4820T. Added support for the C-Series. Introduced on the E-Series. Usage Information Related Commands To redistribute the default route (x:x:x:x::x), use the default-information originate command. default-information originate - configures default external route into OSPFv3. 1246 Open Shortest Path First (OSPFv2 and OSPFv3)