Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1574

● diffie-hellman-group14-sha1 port port-number (OPTIONAL) Enter the keyword port then the port number of the listening port of the SSH server. The range is from 1 to 65535. The default is 22. [version {1 | 2}] (OPTIONAL) Enter the keyword version then the SSH version 1 or 2 to specify only SSHv1 or SSHv2. NOTE: If you enable FIPS mode, you can only select version 2. Defaults ● Default listening port is 22. ● Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr. ● When FIPS is enabled, the default is hmac-sha1-96. ● When FIPS is not enabled, the default is hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmacsha2-256. ● When FIPS is enabled, the default is diffie-hellman-group14-sha1. ● When FIPS is not enabled, the default is diffie-hellman-group-exchange-sha1,diffie-hellman-group1sha1,diffie-hellman-group14-sha1. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.5(0.1) 9.5(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Introduced on the C9010. Introduced the cipher, kex and mac options on the Z9500. Introduced the cipher, kex and mac options on the Z9000, S6000, S4820T, S4810, and MXL. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Example This command enables the SSH server and begins listening on a port. If a port is not specified, listening is on SSH default port 22. Dell# conf Dell(conf)# ip ssh server port 45 Dell(conf)# ip ssh server enable Dell# Related Commands show ip ssh - displays the ssh information. 1574 Security