Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1613

Example Related Commands Version 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Dell#show snmp engineID Local SNMP engineID: 0000178B02000001E80214A8 Remote Engine ID IP-addr Port 80001F88043132333435 172.31.1.3 5009 80001F88043938373635 172.31.1.3 5008 Dell# snmp-server engineID - configures local and remote SNMP engines on the router. show snmp group Display the group name, security model, status, and storage type of each group. C9000 Series Syntax show snmp group Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information Example The following Example displays a group named ngroup. The ngroup has a security model of version 3 (v3) with authentication (auth), the read and notify name is nview with no write view name specified, and finally the row status is active. Dell#show snmp group groupname: ngroup readview : nview notifyview: nview row status: active Dell# security model: v3 auth writeview: no write view specified Simple Network Management Protocol (SNMP) and Syslog 1613