Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1091

ipv6 mld version Configure the MLD version on the system. Syntax ipv6 mld version {1 | 2} Defaults MLD version 2 Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.14(1.0) Introduced on the S3048-ON, S4048-ON, S4048T-ON, S5048F-ON, S6000-ON, S6010-ON, S6100-ON, Z9100-ON, S3100, and C9010. Usage Information Example The ipv6 mld version command is applicable for MLD snooping-enabled interfaces. The following is a sample configuration wherein MLD version 1 is selected on the system. interface Vlan 61 ip vrf forwarding red ipv6 address 61::9/64 ipv6 ospf 2 area 0 untagged TenGigabitEthernet 2/18 ipv6 pim sparse-mode ipv6 mld version 1 no shutdown show ipv6 mld groups View the configured MDL groups. Syntax Parameters show ipv6 mld [vrf vrf-name] groups [detail] [group-address] [interface interface [detail]] vrf vrf-name group-address interface interface (Optional) Enter the keyword vrf followed by the name of the VRF. Enter the group address for which you want to display information. Enter the following keywords and slot/port or number information: ● For a Port Channel interface, enter the keywords port-channel then a number. ● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. ● For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. detail View detailed group information. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.11(3.0) Introduced on the S3048-ON, S4048-ON, S4048T-ON, S6000-ON, S6010-ON, S6100-ON, Z9100-ON, S3100, and C9010. Multicast Listener Discovery Protocol 1091