Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 193

flash:// Enter the location of the OS6 files on a flash drive. Default None Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.11(0.0) Introduced on the C9010 Usage Information If you previously installed Dell Networking OS 9.x.x.x on a N20xx or N30xx series device to use it as a port extender for a C9010, you can use the upgrade system-image-os6 command to install Dell Networking OS 6.x.x.x and use it as a switch. verify Validate the software image on the flash drive after the image has been transferred to the system, but before the image has been installed. C9000 Series Syntax Parameters verify { md5 | sha256 }[ flash:// ] img-file [hash-value] md5 sha256 flash:// img-file hash-value Enter the md5 keyword to use the MD5 message-digest algorithm. Enter the sha256 keyword to use the SHA256 Secure Hash Algorithm (Optional). Enter the flash:// keyword. The default is to use the flash drive. You can just enter the image file name. Enter the name the Dell Networking software image file to validate. (Optional). Enter the relevant hash published on i-Support. Default flash drive Command Modes EXEC mode Command History Version 9.9(0.0) 9.5(0.1) 9.5(0.0) Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000, S6000, S4820T, S4810, and MXL. Usage Information You can enter this command in the following ways: ● verify md5 flash://img-file ● verify md5 flash://img-file ● verify sha256 flash://img-file ● verify sha256 flash://img-file File Management 193