Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 685

protocol frrp Enter the Resilient Ring Protocol and designate a ring identification. C9000 Series Syntax Parameters protocol frrp {ring-id} To exit the ring protocol, use the no protocol frrp {ring-id} command. ring-id Enter the ring identification number. The range is from 1 to 255. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced Usage Information This command places you into the resilient ring protocol. After executing this command, the command line prompt changes to conf-frrp. show frrp Display the resilient ring protocol configuration. C9000 Series Syntax Parameters show frrp [ring-id [summary]] | [summary] ring-id summary Enter the ring identification number. The range is from 1 to 255 (OPTIONAL) Enter the keyword summary to view just a summarized version of the Ring configuration. Defaults none Command Modes EXEC Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Force10 OS Resilient Ring Protocol (FRRP) 685