Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 975

Defaults LPM CAM is not partitioned with Partition 1. IPv6 /65 to /128 prefixes are not converted to /64 prefixes and saved in the LPM table. All the packets for extended IPv6 route prefixes are transmitted using the default route path. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.5(0.1) 9.3(0.1) Introduced on the C9010. Introduced on the Z9500. Introduced on the S6000. Usage Information You can partition the LPM table to store extended IPv6 route prefixes with /65 to /128 mask lengths. LPM CAM partitioning requires a switch reload to take effect. To disable LPM CAM partitioning and return the number of the IPv6 /65-/128 route prefixes stored in Partition 1 to 0, enter the no cam-ipv6 extended-prefix command. clear ipv6 fib Clear (refresh) all forwarding information base (FIB) entries on a line card. C9000 Series Syntax Parameters clear ipv6 fib {linecard slot-id } vrf vrf-name vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to clear the neighbor corresponding to that VRF. NOTE: If you do not specify this option, neighbors corresponding to the default VRF are cleared. linecard slot Enter the slot number to clear the FIB for a linecard. Range is 0 to 11. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.7(0.1) 9.7(0.1) 9.2(1.0) 9.0.0.0 8.3.19.0 8.3.7.0 8.2.1.0 7.8.1.0 Introduced on the C9010. Introduced on the S3048-ON. Introduced on the S4048-ON. Introduced on the Z9500. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the C-Series and S-Series. IPv6 Basics 975