Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1384

power inline mode Configures PoE power management mode for a specified port extender. C9000 Series Syntax Parameters power inline mode {pe pe-id stack-unit unit number class | static } pe pe-id stack-unit unit number class static Enter the keyword pe and port extender ID. Range is 0-255. Enter the keyword stack-unit and the unit number. Range is 0-7. Enter the keyword class to configure the class mode for the specified port extender. Enter the keyword static to configure the static mode for the specified port extender. Defaults Static Command Modes CONFIGURATION CONFIGURATION TERMINAL BATCH Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.10(0.0) 9.9(0.0) Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Usage Information Example The power inline mode command allows you to manage inline power supply on the port extender (PE) ports. You can configure class or static mode to manage inline power in a port extender. When class mode is configured, maximum power for the particular class of device is allocated. Class mode supports power allocation via Layer 2 classification and power negotiation by Link Layer Discovery Protocol (LLDP) 802.3at standard . When static mode is configured, the inline power is allocated based on the actual power consumption by the powered device. Power negotiation via LLDP is not supported in static mode. Use this command in Configuration Terminal Batch mode to manage inline power supply in a dual-homing setup. The following examples show power management mode, "class" configured for the port extender 255. Dell(conf)#power inline mode pe 0 stack-unit 0 static Dell#show power inline pe 0 stack-unit 0 Global inline power Threshold : Power Reserved for inline Power: Total Inline Power Consumed: Remaining inline power Available: Power Management Mode: 99 841W 0W 841W Static Interface Inline Power Inline Power Class Device PoE Port LLDP Max / Alloc Consumed Type Priority Support (Watts) (Watts) 1384 Port Extenders (PE)