Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1543

Related Commands Version 6.2.1.0 Description Introduced on the E-Series. radius-server host - configures a RADIUS host. radius-server timeout To reply to a request, configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server . C9000 Series Syntax Parameters radius-server timeout seconds To return to the default value, use the no radius-server timeout command. seconds Enter the number of seconds between an unsuccessful attempt and when the system times out. The range is from zero (0) to 1000 seconds. The default is 5 seconds. Defaults 5 seconds Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands radius-server host - configures a RADIUS host. rate-limit Configure NAS to allow or reject RADIUS dynamic authorization (DA) packets based on the configurable rate limit value. Syntax rate-limit packets per minute To undo the configuration, enter the no rate-limit command. Defaults Parameters 30 packets per minute. packet per minute Enter the number of packets that you want processed per minute. The range is between 10 to 60 packets per minute. Security 1543