Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1290

Related Commands Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced. vlan forward-delay - changes the time interval before the system transitions to the Forwarding state. vlan hello-time - change the time interval between BPDUs. vlan max-age - changes the time interval before PVST+ refreshes. show spanning-tree pvst - displays the PVST+ configuration. vlan forward-delay Set the amount of time the interface waits in the Listening state and the Learning state before transitioning to the Forwarding state. C9000 Series Syntax Parameters vlan vlan-range forward-delay seconds To return to the default setting, use the no vlan forward-delay command. vlan vlan-range forward-delay seconds Enter the keyword vlan then the VLAN numbers. The range is from 1 to 4094. Enter the keywords forward-delay then the time interval, in seconds, that the system waits before transitioning PVST+ to the forwarding state. The range is from 4 to 30 seconds. The default is 15 seconds. Defaults 15 seconds Command Modes CONFIGURATION (conf-pvst) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.1 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced. 1290 Per-VLAN Spanning Tree Plus (PVST+)