Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1403

Parameters vlan-id community vlanid interface interface (OPTIONAL) Enter a VLAN ID number to display the PVLAN configuration. (OPTIONAL) Enter the keyword community and a PVLAN ID number to display the configuration for a community PVLAN. (OPTIONAL) Enter the keyword interface and specify the interface type and slot/port numbers or port-channel number to display the PVLAN configuration for a member interface. The valid values are: ● For a port channel interface, enter the keyword port-channel and a portchannel ID. ● For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet then the slot/port information. ● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. ● For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE then the pe-id / stack-unit / port-id information. ● For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-unit unit-number range is from 0 to 7; and the portid range is 25 to 28 or 49 to 52 depending on the PE. isolated mapping primary vlan-id (OPTIONAL) Enter the keyword isolated and a PVLAN ID number to display the configuration of an isolated PVLAN. (OPTIONAL) Enter the keyword mapping to display the community and isolated PVLAN mapping to primary PVLANs. (OPTIONAL) Enter the keyword primary and a PVLAN ID number to display the configuration of a primary PVLAN. Defaults none Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.13.0.1P1 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.1 7.8.1.0 Introduced peTenGigE interface support on the C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Usage Information Examples of all types of command output are shown below. The first type of output is the result of not entering an optional keyword. It displays a detailed list of all PVLANs and their member VLANs and interfaces. The other types of output show details about PVLAN subsets. The following describes the show private-vlan command shown in the Examples below. Field Description Primary Secondary Displays the VLAN ID of the designated or associated primary VLAN(s). Displays the VLAN ID of the designated or associated secondary VLAN(s). Private VLAN (PVLAN) 1403