Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 500

vman-dual-qos number Enter the keyword vman-dual-qos and then the number of FP blocks for VMAN dual QoS. The range is from 0 to 4. Ipv4pbr number Enter the keyword ipv4pbr and then the number of FP blocks for ipv4pbr ACL. The range is from 0 to 8. Openflow number Enter the keyword openflow and then the number of FP blocks for open flow (multiples of 4). The range is from 0 to 8. fcoeacl number Enter the keyword fcoeacl and then the number of FP blocks for FCOE ACL. The range is from 0 to 6. Iscsioptacl number Enter the keyword iscsioptacl and then the number of FP blocks for iSCSI optimization ACL. The range is from 0 to 2. fedgovacl Enter the keyword fedgovacl and then the number of FP blocks for Fed Gov ACL. The range is from 0 to 8. vrfv4acl number Enter the keyword vrfv4acl and then the number of FP blocks for VRF IPv4 ACL. The range is from 0 to 2. l2acl number ipv4acl number ipv6acl number, Allocate space to each CAM region. Enter 4 or 8 for the number of OpenFlow FP blocks. ipv4qos number ● 4: Creates 242 entries for use by the OpenFlow controller (256 total entries l2qos numberl2pt minus the 14 entries reserved for internal functionality) number ipmacacl number ecfmacl number ● 8: Creates 498 entries for use by the OpenFlow controller (512 total entries minus the 14 entries reserved for internal functionality) {nlbclusteracl] The fcoe range is 0-6 groups. Each group has 128 entries; the value given must be [vman-qos | an even number. This information is stored in the NVRAM and is effective after vman-dual-qos rebooting the switch. number] ipv4pbr numberopenflow {4|8} | fcoe number [iscsioptacl number] [vrfv4acl number] Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.8(0.0) 9.7(0.0) 9.4.(0.0) 9.2(1.0) 9.2(0.2) 9.1.(0.0) 8.3.19.0 8.3.11.1 8.3.10.2 8.3.10.0 Introduced on the C9010. Introduced on the S3048-ON and S4048-ON. Added the nlbcluster ACL keyword. Introduced on the S6000-ON. Added support for PBR and VRF. Introduced on the Z9500. Added support for fcoe. Added support for OpenFlow. Introduced on the S4820T. Introduced on the Z9000. Clarified block information for the S4810. Introduced on the S4810. 500 Content Addressable Memory (CAM)