Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 156

terminal length Configure the number of lines displayed on the terminal screen. C9000 Series Syntax Parameters terminal length screen-length screen-length Enter a number of lines. Entering zero causes the terminal to display without pausing. The range is from 0 to 512. Defaults 24 lines Command Modes ● EXEC ● EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. traceroute View a packet's path to a specific device. C9000 Series Syntax Parameters traceroute {host | vrf instance | ip-address | ipv6-address} host vrf instance ip-address ipv6-address Enter the name of device. (Optional) E-Series Only: Enter the keyword vrf then the VRF Instance name. Enter the IP address of the device in dotted decimal format. Enter the IPv6 address, in the x:x:x:x::x format, to which you are testing connectivity. NOTE: The :: notation specifies successive hexadecimal fields of zeros. Defaults ● Timeout = 5 seconds ● Probe count = 3 156 Control and Monitoring