Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 79

Parameters To delete a user name and its password, use the no ftp-server username username command. username password password encryption-type Enter a text string up to 40 characters long as the user name. Enter the keyword password then a string up to 40 characters long as the password. Without specifying an encryption type, the password is unencrypted. (OPTIONAL) After the keyword password, enter one of the following numbers: ● 0 (zero) for an unecrypted (clear text) password ● 7 (seven) for a hidden text password Defaults Not enabled. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. hostname Manually set a desired host name for the system. C9000 Series Syntax Parameters hostname name From a PE console, use hostname name to set a PE system host name. To unconfigure a hostname configured for a PE, use no hostname name Enter a text string, up to 32 characters long. Defaults Dell Networking OS Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) Introduced on the C9010 and C1048P. Control and Monitoring 79