Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 1232

Example Lines Beginning With or Including OSPFv3... 05:21:01 Sending Ver:3 Description Debugging is on for all OSPFv3 packets and all interfaces. Displays the time stamp. Sending OSPF3 version.. default-information originate Configure the system to generate a default external route into an OSPFv3 routing domain. C9000 Series Syntax Parameters default-information originate [always] [metric metric-value] [metric-type type-value] [route-map map-name] To return to the default values, use the no default-information originate command. always metric metricvalue metric-type type-value route-map mapname (OPTIONAL) Enter the keyword always to specify that default route information must always be advertised. (OPTIONAL) Enter the keyword metric then a number to configure a metric value for the route. The range is from 1 to 16777214. (OPTIONAL) Enter the keywords metric-type then an OSPFv3 link state type of 1 or 2 for default routes. The values are: ● 1 = Type 1 external route ● 2 = Type 2 external route (OPTIONAL) Enter the keywords route-map then the name of an established route map. Defaults Disabled. Command Modes ROUTER OSPFv3 Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version Description 9.9(0.0) 9.2(1.0) 9.1.(0.0) 8.3.19.0 7.8.1.0 7.4.1.0 Introduced on the C9010. Introduced on the Z9500. Introduced on the S4810 and Z9000. Introduced on the S4820T. Added support for C-Series. Introduced on the E-Series. Related Commands redistribute - redistributes routes from other routing protocols into OSPFv3. 1232 Open Shortest Path First (OSPFv2 and OSPFv3)