Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 108
show dot1x interface, S-Series
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
www.dell.com | support.dell.com show dot1x interface s S6000 Display the 802.1X configuration of an interface. Syntax Parameters Defaults Command Modes Command History Usage Information Example show dot1x interface interface [mac-address mac-address] interface mac-address Enter one of the following keywords and slot/port or number information: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. (Optional) MAC address of a supplicant. No default values or behavior EXEC EXEC privilege Version 9.0.2.0 Version 8.3.12.0 Version 8.4.1.0 Introduced on S6000 Introduced on the S4810. Introduced on S-Series S-Series : Enter a supplicant's MAC address using the mac-address option to display information only on the 802.1X-enabled port to which the supplicant is connected. If 802.1X multi-supplicant authentication is enabled on a port, additional 802.1X configuration details (port authentication status, untagged VLAN ID, authentication PAE state, and backend state) are displayed for each supplicant as shown in the last example. FTOS#show dot1x int Gi 2/32 802.1x information on Gi 2/32: Dot1x Status: Enable Port Control: AUTO Port Auth Status: UNAUTHORIZED Re-Authentication: Disable Untagged VLAN id: None Guest VLAN: Enable Guest VLAN id: 10 Auth-Fail VLAN: Enable Auth-Fail VLAN id: 11 Auth-Fail Max-Attempts: 3 Tx Period: 30 seconds Quiet Period: 60 seconds 108 | 802.1X